This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not be construed as guaranteeing specific properties or suitability for a particular application
Calight® 50 is a calcium aluminate cement with a minimum Al2O3 content of 50%. It is produced in a rotary kiln using high purity bauxite and limestone. Due to its very light colour, Calight® 50 can not only be used in refractory applications but also in further building chemistry where a light colour is needed.
Most often, Calight® 50 is used in combination with Ordinary Portland Cement to accelerate setting times and improve early strength development. A negligible amount of free lime is produced, resulting in an improved resistance against acids and sulphate attack.
When applied in its pure form combined with heat-resistant aggregate, Calight® 50 can withstand extremely high temperatures, making it suited for a wide variety of refractory applications.
(According to Vicat, when combined with OPC at a 1:2 ratio):
(500 grams of Calight® 50 tested with 1350 grams of normalized sand):
| Time | Flexural Strength | Compressive Strength |
|---|---|---|
| 6 hours | ≥ 3.50 | ~ 30.00 |
| 24 hours | ≥ 6.50 | ~ 65.00 |
| 72 hours | ≥ 7.50 | ~ 70.00 |
The information given above is based on our current experiences and knowledge of the product. It gives no guarantee of the eventual result. The customer remains responsible for testing the product before use. Caltra Nederland B.V. cannot be held responsible for possible damage caused by (incorrect) use of its products. For additional information with regard to safe use, please consult the Material Safety Datasheet (SDS).
